Specs
- Width 49.2 in. (125.0 cm)
- Height 51.2 in. (130.0 cm)
- Length 94.5 in. (240.0 cm)
- Curb Weight 1191
- Deck Style Floating Deck
- Deck Style Description Full floating center discharge cutting deck for dedicated bagging with patented Fill Reduction Baffles and heavy duty gear driven spindle assembly.
- Width / Cutting Deck 48"
- Deck Construction 7-gauge sides joined by a continuous bead weld to a 10-gauge top, 3/16" wear guard is welded to the entire base of the deck, 7-gauge deck spindle supports, 0.25"-thick strap steel deck supports.
- Cutting Heights 1.0" (2.54 cm) to 4.0" (10.2 cm) in 0.25" (0.64 cm) increments .
- Blade Tip Speed Approximately 18,500 fpm.
- Blades 2 Blades at 25" Length
- Bag Capacity 9.5 bushel (76 gallons)
- Engine Brand Kohler
- Transmission Speeds Infinitely Variable
- Transmission Brand Hydro-Gear
- Engine Model CH730
- Engine Displacement 725
- Engine Series Command™ EFI
- Speed Infinitely variable speed selection from 0–7.0 mph (11.3 kmph) forward, 0–4.5 mph (7.2 kmph) reverse.
- Transmission Hydrostatic
- Engine Spec 3064
- Engine Speed 3,600 rpm
- Drive Hydro-Drive
- Fuel Capacity 7.5-gallon (28.4-L), pivoting tank for easier engine service.
- Air Filter Heavy-duty canister air filtration
- Drive Description New Dual Hydro-Gear 12 cc variable displacement pumps power Hydro-Gear H Series motors.
- Fuel Type Gas EFI
- PTO Engagement Lever-actuated clutching belt with 6" brake band.
- Fuel Indicator Translucent Visual
- Drive Wheel Release Allows movement without engine running.
- Deck Lift Deck latch for easier height of cut adjustment
- Carb Compliant No
- Safety Package Operator Presence Controls (OPC) and drive system interlock.
- ROPS Optional 2-post foldable ROPS with seat belt and latch.
- UPC 193308000275
- Starter Electric
- Steering Control FeatherTouch hand-control drive levers, low-force constant speed lever.
- Front Caster Tires 8 x 3.0-4 semi-pneumatic.
- Drive Tires 18 x 10.5-10 Multi-Trac® C/S.
- Parking Brake Wet disc, internal in wheel motor.
- Tractor Frame Channeled and fully welded 1.5" x 1.5" x 0.187" wall tubing with a ground clearance of 4.0", strategically located, continuous force counterweight springs.
- Blade Spindles Heavy Duty cast iron right-angle gearboxes.
- Electrical 12-volt battery with 20-amp alternator.
- Seat Commercial grade high back contoured foam padded with hinged mounting.
Dual Semi-Pneumatic Rear Casters
Spread your hopper load to minimize turf impact with this split caster kit.
Buy Now
Harness Add-On Accessory Kit
Take the hassle out of dual accessory fit up with this add-on harness.
Rollover Protection System
Optimize safe operation with this Roll Over Protection System.
Buy Now
Dump Tubs
Debris can be quickly and conveniently managed with our two polyethylene tub inserts. These removable tubs enable the weight of a full, 9.5-bushel hopper to be split and unloaded, one tub at a time.
Buy NowPowered Dump
Improve productivity by not having to leave your operator position with this power dump accessory. A full load of grass can be managed with the push of a button. Or, if dumping by hand is your preference, this accessory automatically disengages and re-engages the hopper without operator intervention.
Buy NowAutomatic Door Opener
Enhance your productivity with this quick opening auto door system.
Buy Now
Comfort Ride Seat Suspension
A great value in comparison to more expensive full-suspension seats, our CustomRide suspension system easily mounts to your existing EVC operator seat. System features enable operator to customize suspension settings to their individual weight and personal preference. Fits all Lazer Z models.
Buy NowLight Kit
Light Kit
Buy Now
Micro-Mulch System
Turns the dedicated bagging deck into a mulcher. The aerodynamically designed deck, baffles and special mulching blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. Single one piece bolt in baffle redirects clippings away from the center rear discharge opening.
Buy Now